Preprocessor exit codes ======================= After a measurement is processed by the preprocessor, an exit code is provided that can help you understand if everything went OK, and if not, what was the problem. The implemented exit codes are the following. 0 Finished without errors 1 Failure in memory allocation 2 Configuration file not found 3 Configuration file error: INPUT_DIR not defined 4 Configuration file error: OUTPUT_DIR not defined 5 Configuration file error: Cannot read in INPUT_DIR 6 Configuration file error: Cannot write on OUTPUT_DIR 7 Configuration file error: Cannot read in SOUNDINGS_DIR 8 Configuration file error: Cannot read in OVERLAP_DIR 9 Configuration file error: Cannot read in LIDARRATIO_DIR 10 Configuration file error: Cannot write on LOG_DIR 12 Wrong usage in calling the script 13 Cannot create output directory 14 An internal error occurred 15 Configuration file error: Cannot read in CLOUDMASK_DIR 16 Configuration file error: Cannot read in CLOUDNET_DIR 17 Configuration file error: Cannot write on RAW_SKIPPING_DIR 18 Cannot create cloudnet output directory 19 Cannot read CA file 20 Found one or more channels defined in the product definition but not linked to the used system configuration. Please check that all the channels in your products are also linked to the used system configuration 21 Cannot connect to SCC_DB 22 Failed in quering SCC_DB 23 Failed in fetching query of SCC_DB 24 Found error(s) in SCC_DB for the submitted Measurement_ID 25 Measurement ID not found in the selected database 26 Measurement_ID not unique in the selected database 27 Unknown usecase in SCC_DB 28 One or more mandatory datetime field(s) are not set into the database 29 Found mismatch among usecase, product type and given channels 30 All the products associated to a system configuration should be processed with the same processor module. 40 Unknown product type in SCC_DB 41 Cannot open NetCDF input file 42 Dimension "time" not found in NetCDF input file 43 Dimension "channels" or "channel" not found in NetCDF input file 44 Dimension "points" not found in NetCDF input file 45 Dimension "scan_angles" not found in NetCDF input file 46 Global attribute "Measurement_ID" not found or not correctly defined in NetCDF input file 47 Incorrect definition of global attribute "Measurement_ID" in NetCDF input file 48 Global attribute "RawData_Start_Date" not found in NetCDF input file 49 Global attribute "RawData_Start_Time_UT" not found in NetCDF input file 50 Global attribute "RawData_Stop_Time_UT" not found in NetCDF input file 51 Variable "Laser_Pointing_Anlge" not found and/or not defined correctly in NetCDF input file 52 "Laser_Pointing_Angle" variable cannot be undefined and should be between 0 and 90. 53 Variable "Laser_Pointing_Angle_of_Profiles" not found and/or not defined correctly in NetCDF input file 54 Variable "Laser_Shots" not found and/or not defined correctly in NetCDF input file 55 Found negative or not defined value in "Laser_Shots" array 56 Cannot write intermediate NetCDF file 57 Variables "Pol_Calib_Range_Min" and/or "Pol_Calib_Range_Max" not found and/or not defined correctly in NetCDF input file 58 Invalid values for variables "Pol_Calib_Range_Min" and/or "Pol_Calib_Range_Max" in NetCDF input file 70 Generic NetCDF error 71 Dimension "time" cannot be zero 72 Dimension "channels" cannot be zero 73 Dimension "points" cannot be zero 74 Natural cubic spline interpolation not possible 75 lfit: no parameters to be fitted 76 gaussj: Singular Matrix 77 Not correct type in NetCDF variable definition 78 Not correct number of dimensions in NetCDF variable definition 79 Not correct type in NetCDF global attribute definition 80 Found invalid value of latitude. Check the database value or the value reported in the raw NetCDF input file 81 Found invalid value of longitude. Check the database value or the value reported in the raw NetCDF input file 82 Found invalid value of altitude. Check the database value or the value reported in the raw NetCDF input file 83 Found invalid value of emission wavelength. Check the database value or the value reported in the raw NetCDF input file 84 Found invalid value of detection wavelength. Check the database value or the value reported in the raw NetCDF input file 101 Found wrong value for integration time in SCC_DB 102 Overlap file not registered in the database. Please register it and then re-run the SCC 103 Lidarratio file not registered in the database. Please register it and then re-run the SCC 104 Sounding file not registered in the database. Please register it and then re-run the SCC 105 Not all required depolarization calibrations is available in SCC_DB. Please submit at least one depolarizatio calibration measurement for each required calibration and link them to the product to be calibrated 106 Found no valid values for depolarization constant in the SCC_DB 107 Unkown depolarization calibration calculation method 108 No depolarization cross-talk correction factors (G and H) are available in SCC_DB for the depolarization channels. Please submit them 109 Found no valid values for depolarization cross-talk correction factors in the SCC_DB 110 No correction factor (K) for depolarization calibration is available in SCC_DB. Please provide at least one value for correction factor and link it to the product to be calibrated 111 Found no valid values for depolarization constant correction factor in the SCC_DB 112 Unkown depolarization correction factor calculation method 113 Found SCC_DB inconsistencies in the definition of transmitted depolarization channels. Please be sure that all the products containing the reflected depolarization channel includes the corresponding transmitted depolarization channel as well. Check also the signal type and the scattering type are set correctly. 114 Found SCC_DB inconsistencies in the definition of reflected depolarization channels. Please be sure that all the products containing the transmitted depolarization channel includes the corresponding reflected depolarization channel as well. Check also the signal type and the scattering type are set correctly. 115 For one or more polarization calibration parameters you have selected to use the option "Use the most recent available calibration previous to the measurement date". No calibrations according to this criteria has been found. So please select another calibration options of provide at least one calibration measurements with a date previous to the current measurement date. 121 Dimension "nb_of_time_scales" not found in NetCDF input file 122 Incorrect definition of global attribute "RawData_Start_Date" in NetCDF input file 123 Incorrect definition of global attribute "RawData_Start_Time_UT" in NetCDF input file 124 Incorrect definition of global attribute "RawData_Stop_Time_UT" in NetCDF input file 125 Variables "channel_string_ID" and/or "channel_ID" not found and/or not defined correctly in the NetCDF input file 126 Missing one or more channels in NetCDF input file 127 Found wrong value(s) in variable "Background_Low" end/or "Background_High" 128 Variable "Background_Low" not found and/or not defined correctly in NetCDF input file 129 Variable "Background_High" not found and/or not defined correctly in NetCDF input file 130 Variable "id_timescale" not found and/or not defined correctly in NetCDF input file 131 Variable "Raw_Data_Start_Time" not found and/or not defined correctly in NetCDF input file 132 Variable "Raw_Data_Stop_Time" not found and/or not defined correctly in NetCDF input file 133 Variable "Raw_Lidar_Data" not found and/or not defined correctly in NetCDF input file 134 Found not integer values in photoncounting signal 135 Variable "Molecular_Calc" not found and/or not defined correctly in NetCDF input file 136 Variable "Molecular_Calc" has not valid value 137 Variable "Pressure_at_Lidar_Station" not found and/or not defined correctly in NetCDF input file 138 Variable "Temperature_at_Lidar_Station" not found and/or not defined correctly in NetCDF input file 139 Found wrong value(s) for channel first signal range bin. Please check your SCC channels configuration of the variable "First_Signal_Rangebin" in NetCDF input file 140 Variable "DAQ_Range" not found and/or not defined correctly in NetCDF input file 143 Variable "Raw_Bck_Start_Time" not found and/or not defined correctly in NetCDF input file 144 Variable "Raw_Bck_Stop_Time" not found and/or not defined correctly in NetCDF input file 145 Global attribute "RawBck_Start_Date" not found in NetCDF input file 146 Global attribute "RawBck_Start_Time_UT" not found in NetCDF input file 147 Global attribute "RawBck_Stop_Time_UT" not found in NetCDF input file 148 Found not compatible values of variable "id_timescale". All the values of "id_timescale" should be less then the dimension "nb_of_time_scales" 150 Global attribute "Sounding_File_Name" not found in NetCDF input file 151 Sounding NetCDF input file not found 152 Dimension "points" not found in Sounding NetCDF input file 153 Global attribute "Sounding_Start_Date" not found in the Sounding NetCDF input file 154 Global attribute "Sounding_Start_Time" not found in the Sounding NetCDF input file 155 Global attribute "Latitude_degrees_north" not found in the Sounding NetCDF input file 156 Global attribute "Longitude_degrees_east" not found in the Sounding NetCDF input file 157 Global attribute "Altitude_meter_asl" not found in the Sounding NetCDF input file 158 Variable "Altitude" not found and/or not defined correctly in the Souding NetCDF input file 159 Variable "Temperature" not found and/or not defined correctly in the Souding NetCDF input file 160 Variable "Pressure" not found and/or not defined correctly in the Souding NetCDF input file 161 Sounding file error: "Altitude" array should contain altitudes in ascendent order (from the lowest point to the highest one) 162 Cannot found variable "LR_Input" within NetCDF input file. This variable is mandatory for elastic backscatter retrievals 163 Found invalid value(s) for Variable "LR_Input" 164 Global attribute "LR_File_Name" not found in NetCDF input file 165 Lidar ratio NetCDF input file not found 166 Dimension "points" not found in lidar ratio NetCDF input file 167 Dimension "products" not found in lidar ratio NetCDF input file 168 Global attribute "Lidar_Station_Name" not found in the lidar ratio NetCDF input file 169 Variable "Altitude" not found and/or not defined correctly in the lidar ratio NetCDF input file 170 Variable "product_ID" not found and/or not defined correctly in the lidar ratio NetCDF input file 171 Variable "Lidar_Ratio" not found and/or not defined correctly in the lidar ratio NetCDF input file 172 Variable "product_id" in the lidar ratio NetCDF input file contains data that are not consistent with the SCC database values 173 Variable "Lidar_Ratio" in the lidar ratio NetCDF input file contains undefined values within the valid altitude range defined by the corresponding product. Please remove them. 174 Lidarratio file error: "Altitude" array should contain altitudes in ascendent order (from the lowest point to the highest one) 175 Overlap NetCDF input file not found 176 Dimension "points" not found in Overlap NetCDF input file 177 Dimension "channels" not found in Overlap NetCDF input file 178 Global attribute "Lidar_Station_Name" not found in the Overlap NetCDF input file 179 Global attribute "Overlap_Measurement_Date" not found in the Overlap NetCDF input file 180 Variable "Altitude" not found and/or not defined correctly in the Overlap NetCDF input file 181 Variable "channel_ID" not found and/or not defined correctly in the Overlap NetCDF input file 182 Variable "Overlap_Function" not found and/or not defined correctly in the Overlap NetCDF input file 183 Overlap file error: "Altitude" array should contain altitudes in ascendent order (from the lowest point to the highest one) 184 Sounding file error: "Temperature" array should contain atmospheric temperature values in degrees Celsius 185 Sounding file error: "Pressure" array should contain atmospheric pressure values in hPa 186 Lidar ratio file error: "Lidar_Ratio" array should contain valid lidar ratio values in sr 187 Overlap file error: "Overlap_Function" array should contain valid overlap correction values 188 Variable "Lidar_Ratio_Error" not defined correctly in the lidar ratio NetCDF input file 189 Dimension "time" is zero in the output file. This may be due to few cloud-free profile within integration time or the integration time is too small. Please check that thare are enought (>2) cloud-free profiles within the integration time in the submitted timeseries 190 Unable to use Poisson statistic in Montecarlo simulation. Found not integer values 191 Found wrong value(s) for "Background_Mode" in NetCDF file or in SCC_DB 192 Found wrong value(s) for variable "Dead_Time_Corr_Type" in NetCDF file or in SCC_DB 193 Cannot apply dead time correction. Please check the dead time value and the your photoncouning raw data 194 Found negative number of counts in lidar data! 195 Found wrong value(s) in variable "Raw_Bck_Start_Time" end/or "Raw_Bck_Stop_Time" and/or in laser repetition rate value 196 Background profiles don"t contain the same number of valid data point of the corresponding lidar profile 197 Cannot calculate errors using Montecarlo simulation within trigger delay correction 198 Linear interpolation not possible 199 Too few cloud-free lidar profiles within the integration time. Please check the integration time is not too small or/and there are enought cloud-free regions in the submitted timeseries 200 Cannot calculate the errors after time integration 201 Found timescales not syncronized 202 Cannot calculate errors using Montecarlo simulation within interpolation routine 203 Gluing between near range and far range signals not possible. No suitable overlap region can found 204 Gluing between near range and far range signals not possible. Poor linear correlation 205 Gluing between near range and far range signals not possible. Too noisy signal(s) 206 Gluing between near range and far range signals not possible. Slope test not passed 207 All the profiles within the submitted timeseries seem contaminated by low clouds. Cannot calculate aerosol optical properties 211 Found wrong value(s) for scattering type id 212 Found wrong value(s) for detection type id 213 Found wrong value(s) for range type id 214 Too few lidar points to calculate atmospheric background. At least 10 lidar rangebins are required within the background subtraction range. 215 Raw time resolution is greater than the selected integration time 216 Gluing between near range and far range signals not possible. Too large difference between signals in gluing point 217 Unkown interpolation type. 218 Found wrong value(s) for signal type id or product channel(s) missing in system channel connections 219 Found range resolution in raw lidar data greater than the value in SCC_DB 220 Error in calculating molecular depolarization ratio 221 Error in getting interferencial filter information for depolarization channels 222 Found too few valid datapoints. Please check the variable "Raw_Lidar_Data" in the raw input file contains at least 15 valid points for all the channels 223 Found not physical values after the interpolation of the sounding file. Try to change the interpolation type (to linear) to fix the problem. 224 Found not physical values after the interpolation of the lidar ratio file. Try to change the interpolation type (to linear) to fix the problem. 225 Found not physical values after the interpolation of the overlap file. Try to change the interpolation type (to linear) to fix the problem. 226 Found incompatible value for the emission wavelength in one or more lidar channels 227 Found not physical values after the interpolation of the model data. Try to change the interpolation type (to linear) to fix the problem. 228 Polarization calibration product and the corresponding product to calibrate refer to different stations! 230 Found invalid value of laser repetition rate. Check the database value or the value reported in the raw NetCDF input file 231 All negative heights above lidar station in sounding file. Please be sure that the heights above sounding station and the sounding station altitude are reported correctly in the sounding file. Check also that your lidar station altitude is correct. 232 All negative heights above lidar station in GDAS file. This shouldn"t happen! Try to force another model or use standard atmosphere or external sounding. 233 Found invalid value of detection wavelength fwhm. Check the database value or the value reported in the raw NetCDF input file 234 Found invalid value of range resolution. Check the database value or the value reported in the raw NetCDF input file 235 Cannot open cloud mask NetCDF file 236 Dimension "time" not found or not defined correctly in the cloudmask NetCDF file 237 Dimension "level" not found or not defined correctly in the cloudmask NetCDF file 238 Variable "time" and/or "time_bounds" not found or not defined correctly in the cloudmask NetCDF file 239 Variable "altitude" not found or not defined correctly in the cloudmask NetCDF file 240 Variable "latitude" not found or not defined correctly in the cloudmask NetCDF file 241 Variable "longitude" not found or not defined correctly in the cloudmask NetCDF file 242 Variable "station_altitude" not found or not defined correctly in the cloudmask NetCDF file 243 Variable "automatic_cloud_mask" or "manual_cloud_mask" not found or not defined correctly in the cloudmask NetCDF file 244 No cloud mask found for this measurement id. Please be sure the cloudmaks module ran succesfully 245 Global attribute "measurement_ID" not found or not defined correctly in the cloudmask NetCDF file 246 Cloud mask data not consistent with raw lidar data! 247 Unknown distribution type for MonteCarlo simulation 248 Polarization calibration: found inconsistency between wavelengths to calibrate and calibration wavelengths 249 Error in getting model data from CloudNet 250 It seems your station is not enabled to get model data from CloudNet. So please set Molecular_Calc=0 or 1 in your raw input file. 251 CloudNet model data have been downloaded succesfully but it seems it contains invalid height value (null or negative values). 254 General error (most probably segmentation fault) 255 Timeout